ESTATE AUCTION: Real Estate (Commercial, Residential, and Investment Properties), Oilfield Related Tools & Equipment in Drumright, OK.

SATURDAY, NOVEMBER 1 AT 10:00 AM

DRUMRIGHT, OK

AUCTION LOCATION: From the intersection of Hwy 33/Broadway and N Harley Ave go north ½ mile to Maple Street. Then go east on Maple to the sale site. Watch for signs.

AUCTIONEER’S NOTE: Due to the passing of pioneer oilman Bud Marrs, the heirs have made the decision to sell his properties and equipment to the highest bidders without reserve to settle the estate.  

Real Estate Sells At 12:30pm

Tract 1: Commercial Shop Property – Maple Street

Situated on approximately one acre, the tract is secured by a six-foot-tall chain link fence and benefits from city utilities. The centerpiece of this tract is a 70' x 70' red iron metal shop with 16-foot sidewalls. Access is effortless with four large 20’ x 15’ overhead doors, each equipped with openers. Two 39-foot radiant natural gas heaters and three forced air natural gas units allowing you to work throughout the winter. Specialized features include a 40-foot-long mechanic’s pit for heavy-duty work, an 8’ x 15’ tool room with an 8’ x 28’ loft for storage, and a convenient 3/4 bathroom. This is a turnkey property designed for commercial or industrial operations.

Tract 2: Updated Residential Home – 705 N Harley Ave

Looking for move-in ready with zero fuss? Check out this adorable, fully updated home! Sitting on a corner lot, this compact gem built in 1967 gives you 576 sq ft of perfectly renovated space. This 1 bedroom home features a new kitchen and ¾ bathroom, completely updated electrical and plumbing, spray foam insulation and a modern mini-split HVAC system. This is the perfect starter home or smart investment property—all the updates are done, just bring your furniture!

Tract 3: Fenced Yard & Lot – Pine & Harley

30’×40’ metal frame shop with concrete slab and powered with 220V electric. Additional 10’×18’ mobile office on skid that includes electric, water, a 1/2 bath, and a window A/C unit. Fully fenced and situated on approximately ½ an acre. Additional 0.16 acre corner lot, at the corner of Pine and Harley.

Tract 4: Recreational/Wooded Lot – Maple Street

Approx. 3.4 acres wooded parcel in town. Located along a seasonal creek and across from Tract 1.

Tract 5: Oil/Gas Investment Tracts – Oak, Cherry & Hickory Streets. These tracts are to be transferred by Quit Claim Deed only.

5-A Oak Street Frontage, approx. ½ acre. Includes a new oil well site.

5-B Cherry St. Frontage, approx. 0.08 ac. Includes a new tank battery site.

5-C Hickory St. Frontage, approx. 0.16 ac

Terms: Seller will accept the highest bid or bids at the close of the auction and provide an abstract to date and a warranty deed on tracts 1 - 4. Tract 5 will be transferred by Quit Claim Deed and no abstract.  Buyer must make a 10% deposit at the conclusion of the auction and pay the balance in cashier’s funds at closing within 45 days of sale.

There are no contingencies for financing, so financial arrangements must be made prior to the auction. For viewing this property or for more details, contact Brian Bendele or Mike Bendele, United Country Real Estate 405-258-0408, OR John Ball or Justin Ball, Ball Auction Service 405-258-1511. Photos & details online at www.BallAuction.bid or www.BendeleCo.com

1980 Ford Ranger F350 pickup w/ steel boom truck bed painted to match, ginpoles, rolling tailboard, Tulsa winch, gas motor, 4-spd transmission, XLT package, shop kept

TRACTORS, BACKHOE & TRAILERS

Case 580M backhoe, shop kept, 3-stick, starts & runs

Ford 7810 II cab tractor, shop kept & clean

Ford 5000 diesel tractor, 3 pt, pto, hour meter shows less than 2000 hrs, shop kept

American 48’ box trailer, 1977 model, shop kept and barely used

7’x14 ½’ tandem axle bumper pull trailer w/ aluminum floor

11’ 2-head pull type rotary mower

Turnbow 20’ custom built horse trailer, used very little

OIL FIELD SUPPLIES & EQUIPMENT

40’ shipping container

20’ shipping container

36’ steel doghouse

24’ oil field doghouse on skid

18’ oil field doghouse on skid

Happy chain drive pump jack

Hit & miss motors

Sucker rod subs

65 ton Tubing elevator

McElroy Poly pipe fusing machine with trimmer, 1”, 1 ½”, 2” & 3”

Packers, various sizes

Swabs

Weld-on pipe fittings

Oil field drill bits

Pipe tongs

Hammer end wrenches

Oil field electrical parts

Misc. oil field supplies

Oilfield motor heads

Oil well heads

Oil field roller chain

Oil field well pumps

Pipe subs

Misc. drill stem

Misc. shivs from 5” to 25”

500 gal poly tank w/ legs

Misc. pipe from 2” up to 8”

7’x10’ mud tank

5’x23’ steel platform

(6) pairs of pipe racks

Catwalk

Misc. sucker rod

Oil field cable

Various electric motors

500 gal propane tank

Large diameter rigid pipe threader

Aluminum headache rack

SHOP TOOLS & EQUIPMENT

Snap-On 15-drawer rolling toolbox

Mac rolling toolbox

Snap-On 7-drawer rolling lower toolbox

Snap-On 9-drawer upper toolbox

Snap-On rolling toolbox, 5-drawer upper and lower boxes w/ side box

Snap-On sockets, metric & standard

Snap-On wobble sockets, hex sockets, specialty end wrenches, torque wrench, ratcheting end wrench sets, line wrenches & end wrenches up to 1 ½”

Snap-On metric & standard end wrenches

Snap-On ½” ratchets & breaker

Snap-On ¼”x 3/8” & ½” ratchets

Generac 23 hp 17500 watt portable generator

(3) Lincoln Idealarc 250 welders

Victor track torch w/ track

Dayton metal band saw

Rigid aluminum & steel pipe wrenches

¾” ratchet & socket set

210 amp battery charger/engine starter

Milwaukee Mag drill

Mark Lift scissor lift, mdl M20, needs batteries

XLEX-Cell 7000 watt portable generator

Rigid floor model drill press

Impact sockets

Gear wrench sets

(18) jts 2 7/8” pipe

Millermatic 200 wire welder

(2) Walker truck floor jacks

Misc. truck tires & wheels

40-ton hydraulic shop press

Rigid pipe threaders

CP 1” air impact

Dayton benchtop drill press

Cummins crank shaft seal installer

Bushing removing & inserting set

Metric & standard tap & die sets

Air conditioning gauges

Hydro Tek pressure washer/steam cleaner

Roll of large rope

Worthington jack hammer

Pickup LP tank

50 gal steel fuel tank w/ 12v pump

50 gal fuel tank w/ 12v pump

Torch set w/ gauges & cart

Rigid 300 portable pipe threader

Lots of 4” ratchets & straps

5’ step ladder

Window unit air conditioner

Bench grinder on stand

Metal cut-off saw

Victor torch gauges

Torch cart

New oxy-acet hoses

220 extension cord

Shop vise

Air impact wrenches

Sockets, ratchets & end wrenches

Drill bits

Parts washer

Misc. 15” & 16” tires

Coates tire machine

Craftsman table saw

Dewalt industrial radial arm saw

Misc. bearings

Nut & bolt bin w/ hardware

Large sockets up to 2 5/8”

Bearing nut sockets

Truck tarps

New 2-drawer panel front drink refrigerator

Large rolling cherry picker

Truck transmission jacks

18’ fiberglass extension ladder

Ratcheting binders

Small Dayton benchtop drill press

Chain boomers

2-wheel dolly

Impact sockets

Screw drivers

Filter wrenches

Vise grips

Adjustable wrenches

Angle grinders

Various power tools

Bluepoint Pocket IQ OBD2 scan tool

Pioneer Universal XM satellite digital tuner

Lots of misc. pipe fittings

DeWalt metal cut-off saw

New in box Atlas Hi bay shop lights

(10)  Sticks 2”x4” square tubing

(4) vintage electric gas pumps

(7) 4-drawer filing cabinets

Air & hydraulic fittings

Lots of nuts, bolts & hardware

Lots of shiv adapters

Lots of pipe fittings

Small torch & gauge set

180,000 BTU forced air heater

Heavy duty steel work bench

Fiberglass 1-man fishing boat w/ live well & trailer

Antique tiger oak upright player piano

Antique pump organ

(3) antique granite cook stoves

Dorm size refrigerator freezer

Owner: Marrs Estate